Welcome to Our Website                                                                                     ≡ 
Contact us: sales@tansi.com.cn   T:+86-25-83353938    中文
 
  • LynX - Hybrid pixel detectors for X-ray Model:LynX 120 Timepix / LynX 1800 Medipix3RX / LynX 1800s Medipix3RX / LynX T3 Timepix3
    These are fast and sensitive detectors for novel X ray applications. The LynX detector series are hybrid pixel area detectors based on the Timepix/Medipix3/Timepix3 technology. They have a pixel pitch of 55 µm, suitable for a wide range of applications. The capability of the LynX detectors to discriminate or measure energy of X rays in each of its 512 x 512 pixels offers excellent performance for X ray detection, imaging and tomography. The detectors consist of a sensor (Si, GaAs, CdTe), which is divided into an array of pixels. Each pixel is connected with miniature bump bonds to the readout ASICs below the sensor.

Introduction
Relevant

Amsterdam Scientific Instruments(ASI)


ASI develop and supply hybrid pixel detectors for a wide range of applications such as X-ray, electron microscopy and mass spectrometry imaging. Our innovative imaging solutions open up new opportunities in various industries by significantly sharper and faster imaging.


LynX 120 Timepix / LynX 1800 Medipix3RX / LynX 1800s Medipix3RX / LynX T3 Timepix3


The LynX detector series are hybrid pixel area detectors based on the Timepix/Medipix3/Timepix3 technology. They have a pixel pitch of 55 µm, suitable for a wide range of applications. The capability of the LynX detectors to discriminate or measure energy of X-rays in each of its 512 x 512 pixels offers excellent performance for X-ray detection, imaging and tomography. The detectors consist of a sensor (Si, GaAs, CdTe), which is divided into an array of pixels. Each pixel is connected with miniature bump-bonds to the readout ASICs below the sensor.


Benefits of our detector

• Direct, single photon detection
• Increase point spread function in charge summing mode
• Zero noise, high S/N and high dynamic range
• Short read out time and high frame rates
• Modular detectors, enabling large active area
• Increased high energy efficiency with high Z sensor materials



LynX 120

LynX 120 is based on the Timepix ASIC. Each pixel either counts the number of detected events, measures the amount of energy deposited in the pixel or measures the time of arrival of the detected photon. The readout provides frame rates up to 120 frames/s.



LynX 1800

LynX 1800 is based on the Medipix3RX ASIC and has improved speed. In continuous read out mode up to 1800 frames/s with zero dead time can be recorded. In charge summing mode improved spectroscopic performance is achieved, avoiding loss of energy because of pixel to pixel charge sharing.In addition, the LynX 1800s, which is also based on Medipix3RX, but with bumps every 110 µm is also available. In charge summing mode, it has 4 energy thresholds allowing to count X-rays in different energy windows in a single measurement.


Applications

• X-ray diffraction 
• Phase Contrast Imaging (Ptychography, Grating Interferometry)
• Scanning SAXS/WAXS Imaging Small-Angle X-ray Scattering
• Small-Angle X-ray Scattering
• Surface Diffraction
• Time Resolved Experiments
• X-ray and medical imaging
• Macromolecular Crystallography
• Tomography



 


Nanjing Tansi Technology Co., Ltd

COPYRIGHT (C)2018 Tansi Inc. All rights reserved    苏ICP备05020058号

Powered by PageAdmin CMS